Single Wall Commercial
Straight Vent Lengths
Gasketed rigid polypropylene vent lengths with dedicated male and female ends. Male ends can be field cut to length. Available in 1’, 2’,3’ and 6’ effective lengths for 6”-10” diameters. Available in 2’, 3’ and 6’ effective lengths in 12” diameter.
87° Elbow
87° Elbows are designed for offsets or directional changes in the system. 3° slope is built into the elbow ensuring the proper flow of condensates back to the appliance. Available in 6”-12” diameters.
45° Elbow
45° Elbows allow for offsets or directional changes in the system. Available in 6”-12” diameters.
Base Support
Supports vertical sections of rigid and flexible vent lengths installed in a chase. Doweled end of metal base inserts into a masonry or sheet rock chase. Metal base can also be supported under B-Vent chase using threaded rod. Available in 6”-12” diameters.
Horizontal Drain Tee
Used to drain condensate from the vent system. Install in horizontal orientation with InnoFlue Siphon or with any 5/16” looped tubing. Available in 6”-12” diameters.
Tee
Use to change direction of the vent system with the option of draining condensates from the system. Available in 6”-12” diameters.
Tee Cap
Use to change direction of the vent system with the option of draining condensates from the system. Available in 6”-12” diameters.
Siphon – Long John w/Flex Hose
Attaches to Horiztonal Drain Tee, Horizontal Drain Fitting or other drain fitting, allowing condensate to escape system while containing combustion gases. Also can be used as an OEM part inside a heating appliance.
Test Port
Installed immediately above the appliance, the Test Port allows maintenance professionals to sample flue gases and ensure optimum appliance performance. Available in 6”-12” diameters
Centric Increaser
Transitions vent system to larger diameter. Install in vertical orientation. Available in 6”-12” diameters
Eccentric Increaser
Transitions vent system to larger diameter. Install in horizontal or vertical orientation. Available in 6”-12” diameters
Centric Reducer
Transitions vent systems to a smaller diameter. Install in horizontal or vertical orientation. Available in 6”-12” diameters
Appliance Adaptor w/Gasket PVC to PPs
Connects InnoFlue SW or Flex to heating appliances using pvc/cpvc coupler as appliance termination. Available in several different configurations to ensure the proper connection. For a complete list of appliance adaptors, see our current catalog. Available in 6”-12” diameters
Appliance Adaptor PVC to PPs
Connects InnoFlue SW or Flex to heating appliances using stainless steel / plastic appliance terminations that contain a gasket. Available in several different configurations to ensure the proper connection. For a complete list of appliance adapters, see our current catalog. Available in 6”-12” diameters
Commercial Appliance Adaptor
Connects InnoFlue SW or Flex to heating appliances using stainless steel / plastic appliance terminations that contain a gasket. Available in several different configurations to ensure the proper connection. For a complete list of appliance adapters, see our current catalog. Available in 6”-12” diameters
Chimney Cover SS w/SS End Pipe
Stainless steel termination with stainless steel end pipe incorporates a combustion air intake and flue gas termination in a single assembly. Combined assembly allows combustion air to flow through chimney/chase. Cover seals top of the chimney/chase. Available in 6” diameter.
Chimney Cover SS w/PPs-UV Black
Stainless steel termination with UV stabilized polypropylene end pipe incorporates a combustion air intake and flue gas termination in a single assembly. Combined assembly allows combustion air to flow through chimney/chase. Cover seals top of the chimney/chase. Available in 8” – 12” diameters.
End Pipe SS
Stainless steel termination with UV stabilized polypropylene end pipe incorporates a combustion air intake and flue gas termination in a single assembly. Combined assembly allows combustion air to flow through chimney/chase. Cover seals top of the chimney/chase. Available in 8” – 12” diameters.
End Pipe PPs-UV Black
End Pipe PPs-UV Black is used on roof terminations or wall terminations exposed to excessive sunlight. Available in 6” Diameter.
Vent Length PPs-UV Black
End Pipe PPs-UV Black is used on roof terminations or wall terminations exposed to excessive sunlight. Available in 6” Diameter.
87° Elbow PPs-UV Black
End Pipe PPs-UV Black is used on roof terminations or wall terminations exposed to excessive sunlight. Available in 6” Diameter.
45° Elbow PPs-UV Black
End Pipe PPs-UV Black is used on roof terminations or wall terminations exposed to excessive sunlight. Available in 6” Diameter.
Termination Tee
Made from U.V. stabilized black polypropylene, Termination Tees are utilized in areas prone to excessive wind or freeze ups. Available in 6” diameter.
Wall Plate Square (Plastic)
Used to improve the aesthetic and eliminate drafts at chimney/chase openings or wall penetrations. Available in 6” diameter.
Wall Plate Square (White Steel)
Used to improve the aesthetic and eliminate drafts at chimney/chase openings or wall penetrations. Available in 6” diameter.
Support Clamp
Used as vertical or horizontal support for InnoFlue SW. Spaced 78” in vertical and 39” in horizontal installations. Overall length can be field shortened or increased by replacing the 10mm threaded rod. Available in 6” diameter.
Bird Screen SS
Made from Stainless Steel, Bird Screen fits inside InnoFlue SW and Flex termination components. Bird Screen reduces ability of pests to enter/nest in vent system. Available in 6”-12” diameters.
EPDM Gaskets
Standard EPDM gasket for 2” through 12” diameter InnoFlue. Inserted into the female end of each part, the gaskets keep flue gases and condensates within the vent system.
Connector Ring
Provides reinforcement at joints to support loads of up to 99lbs (45kg.) Required for ULC-S636 complaint installations. Available in 6” diameter. Patent Pending.
Centrocerin
A water based lubricant used to ease the assembly of InnoFlue SW & Flex. Applied to either the gasket or male end of InnoFlue components, Centrocerin evaporates several hours after application.
Vibration Isolation Boot w/Clamps
High temperature silicon boot seals InnoFlue SW Vent Lengths and Appliance Adaptors to appliance flue outlets. Available in 6”-12” diameters.
Roof Termination w/Collar SS
High temperature silicon boot seals InnoFlue SW Vent Lengths and Appliance Adaptors to appliance flue outlets. Available in 6”-12” diameters.
Termination Piece w/ End Pipe SS
High temperature silicon boot seals InnoFlue SW Vent Lengths and Appliance Adaptors to appliance flue outlets. Available in 6”-12” diameters.
Branch Tee with Feeders
42° Y’s allow for the cascading of appliances in a back to back or inline configuration. Branch Tees are available with 4” through 12” headers and 4” through 12” feeders in various lengths.
Branch Tee with Multiple Feeders
42° Y’s allow for the cascading of appliances in a back to back or inline configuration. Branch Tees are available with 4” through 12” headers and 4” through 12” feeders in various lengths.
Horizontal Drain Fitting
Placed at the end of the last Branch Tee in cascade configuration, the Horizontal Drain Fitting removes condensate from the system and allows for system cleanout. Available in 4”-12” diameters.
Non-Return Valve
Used in positive pressure cascade or common vent configuration, Non-Return Valves inhibit the escape of combustion gas through non-operating appliances. Product is only available for purchase through original equipment manufacturers. Available in 2”, 3”, 4” and 6” diameters.
Pitched Roof Flashing SS
Used in positive pressure cascade or common vent configuration, Non-Return Valves inhibit the escape of combustion gas through non-operating appliances. Product is only available for purchase through original equipment manufacturers. Available in 2”, 3”, 4” and 6” diameters.
Flat Roof Flashing SS
Used in positive pressure cascade or common vent configuration, Non-Return Valves inhibit the escape of combustion gas through non-operating appliances. Product is only available for purchase through original equipment manufacturers. Available in 2”, 3”, 4” and 6” diameters.