InnoFlue® Single Wall
Our Single wall rigid pipe offers a wide range of venting solutions to suit your specific application.
Vertical installation/termination through the roof
InnoFlue® Single wall can be installed directly through pitched or flat roofs. All of our products are listed at zero clearance to combustibles. Support clamps every 6 feet support the vent lengths and allow for natural expansion and contraction. InnoFlue® Single Wall Polypropylene Vent Systems can be used in areas that require a one or two hour fire rating per ASTM E-814, UL 1479 or ULC S115 when used with a listed passive fire protection system. Approved passive fire protection system manufacturers include PFP Partners and 3M. This InnoFlue® Fire Rated Assembly Supplement is guideline, the Passive Fire Protection System Manufacturer’s installation instructions should be followed at all times.
InnoFlue® single wall termination through the roof
Typical combinations of InnoFlue® single wall terminations through roof.
Vertical installation/termination through a masonry chimney/chase
InnoFlue® single wall can also be installed in an existing chimney or chase with ease. The use of our base support system and spacers every 6 feet eliminate the need for supports on the interior of the chimney, while our chimney cover secures the system at the top of the chimney. Multiple InnoFlue® vents or air intake systems can be installed in the same chase.
InnoFlue® single wall termination through chimney
Typical InnoFlue® single wall termination through a chase (cascade).
Side wall termination
If terminating through a roof or chimney is not a feasible option, InnoFlue® can be easily terminated horizontally through a wall. Support clamps every 3 feet on horizontal configurations must be utilized to support the system. Pitch any horizontal portion of the vent system at an angle of no less than three degrees or 5/8"/feet (5.6cm/m) towards the appliance. We have a variety of aesthetically pleasing termination pieces that not only maintain the functional integrity of the system but avoid the common “eyesore” appearance of many other vent manufacturers’ terminations.
InnoFlue® single wall sidewall termination
Typical InnoFlue® single wall sidewall termination combinations.
