Single Wall Residential
Straight Vent Lengths
Gasketed rigid polypropylene vent lengths with dedicated male and female ends. Male ends can be field cut to length. Available in 1’, 2’,3’ and 6’ effective lengths.
87° Elbow
87° Elbows are designed for offsets or directional changes in the system. 3° slope is built into the elbow ensuring the proper flow of condensates back to the appliance.
87° Elbow Long
87° Elbow Long is designed for increased offsets or directional changes in the system. 3° slope is built into the elbow ensuring the proper flow of condensates back to the appliance.
45° Elbow Long
Longer 45° Elbow allows for greater offsets when changing direction or avoiding obstructions in the vent system.
Base Support
Supports vertical sections of rigid and flexible vent lengths installed in chimneys and chases.
Horizontal Drain Tee
Use to drain condensate from the vent system. Install in horizontal section closest to appliance. 32mm O.D. drain.
Siphon – Long John w/Flex Hose
Attaches to Horiztonal Drain Tee, or Horizontal Drain Fitting allowing condensate to escape system while containing combustion gases.
Test Port
Installed immediately above the appliance, the Test Port allows maintenance professionals to sample flue gases and ensure the appliance is operating at optimum efficiency.
Centric Increaser
Transitions vent system to a larger diameter. Install in vertical orientation only. Additional configurations available upon request.
Eccentric Increaser
Transitions vent system to a larger diameter. Install in horizontal or vertical orientation. Other size combinations available upon request.
Centric Reducer
Transitions vent systems to a smaller diameter. Install in horizontal or vertical orientation.
Appliance Adaptor w/Gasket PVC to PPs
Adapts a female PVC / CPVC coupler or appliance flue exhuast to InnoFlue® SW or Flex
Appliance Adaptor PVC to PPs
Adapts a female stainless steel appliance flue exhaust (with integrated gasket) to InnoFlue® SW or Flex.
Twin Pipe to Concentric Adaptor
Transitions InnoFlue Single Wall Residential to InnoFlue Concentric. Commonly used to transition to a concentric roof or wall termination.
Concentric to Twin Pipe Adaptor
Transitions InnoFlue Concentric or concentric heating appliance terminations to InnoFlue Single Wall configuration.
Chimney Cover PPs-UV Black
This termination incorporates a combustion air intake and flue gas termination in a single assembly. Cover seals top of the chimney or chase. Use with End Pipe or Flex End Pipe. End Pipes sold seperately.
Chimney Cover SS w/PPs-UV Black
Stainless steel termination with UV stabilized polypropylene end pipe incorporates a combustion air intake and flue gas termination in a single assembly. Combined assembly allows combustion air to flow through chimney/chase. Cover seals top of the chimney/chase.
End Pipe PPs-UV Black
Made from black U.V. stabilized polypropylene. Use on roof terminations or wall terminations exposed to excessive sunlight.
Termination Tee
Made from U.V. stabilized black polypropylene, Termination Tees are utilized in areas prone to excessive wind or freeze ups.
Spacer
Self positioning spacers centers InnoFlue® SW or InnoFlue® Flex within a chase/chimney/B-vent.
Wall Plate Square (Plastic)
Used to improve the aesthetic and eliminate drafts at chimney/chase openings or wall penetrations.
Wall Plate Square (White Steel)
Used to improve the aesthetic and eliminate drafts at chimney/chase openings or wall penetrations.
Support Clamp
Used as vertical or horizontal support. Spaced 78” in vertical and 39” in horizontal installations. Overall length "A" can be field shortened or increased by replacing the 10mm threaded rod.
Bird Screen PPs-UV Black
Made from PPs-UV Black, Bird Screen fits inside InnoFlue SW and Flex end-pipes at terminations.
EPDM Gaskets
Standard EPDM gasket for 2” through 12” diameter InnoFlue. Inserted into the female end of each part, the gaskets keep flue gases and condensates within the vent system.
Connector Ring
Provides reinforcement at joints to support loads of up to 99lbs (45kg.) 6" through 12" connector rings are available but not required per UL-1738 and ULC-S636. Patent Pending.
Air Intake
Place atop a concentric appliance flue outlet when exhausting flue gases through InnoFlue® SW or Flex and combustion air is supplied from within.
Centrocerin
A water based lubricant used to ease the assembly of InnoFlue® SW & Flex. Applied to both the gasket and male end of InnoFlue® components.
Commercial Appliance Adaptors SS to PPs
Adapts a stainless steel appliance flue exhaust with gasket and clamp to InnoFlue®.
Commercial Appliance Adaptor w/ Condensate Drain and Vibration Isolation Boot
Adapts Camus Dynaforce boilers to Innoflue®. Other increasing size combinations available upon request.
Commercial Appliance Adaptor w/ Vibration Isolation Boot
Adapts Raypak XTherm to InnoFlue®. Longer lengths available upon request.
Vibration Isolation Boot with Clamps
High temperature silicone boot seals InnoFlue® SW Vent Lengths and Fittings to appliance flue outlet.
30° Elbow
High temperature silicone boot seals InnoFlue® SW Vent Lengths and Fittings to appliance flue outlet.
Branch Tee with 4" Feeder
42 degree Y allows for the cascading of appliances in an inline configuration. Other sizes and configurations available upon request.
Branch Tee w/2 x 4" Feeders
42 degree Y allows for the cascading of appliances in an inline configuration. Other sizes and configurations available upon request.
Branch Tee w/4 x 4" Feeders
42 degree Y allows for the cascading of appliances in an inline configuration. Other sizes and configurations available upon request.
Non-Return Valve
Used in cascade or common vent configurations, Non-Return Valves prevent the escape of combustion gas through non-operating appliances. Product is only available for purchase through original equipment manufacturers.
Horizontal Drain Fitting
Used in cascade or common vent configurations, Non-Return Valves prevent the escape of combustion gas through non-operating appliances. Product is only available for purchase through original equipment manufacturers.
Extra Long John Siphon
Used in cascade or common vent configurations, Non-Return Valves prevent the escape of combustion gas through non-operating appliances. Product is only available for purchase through original equipment manufacturers.
Ball Valve Siphon
Attaches to Horizontal Drain Tee, or Horizontal Drain Fitting allowing condensate to escape system while containing combustion gas.
Chimney Cover SS W/PPs-UV End Pipe
Attaches to Horizontal Drain Tee, or Horizontal Drain Fitting allowing condensate to escape system while containing combustion gas.
Chimney Cover SS W/SS End Pipe
Attaches to Horizontal Drain Tee, or Horizontal Drain Fitting allowing condensate to escape system while containing combustion gas.
B-Vent Rain Collar PPs-UV
B-Vent Rain Collar seals the top of an existing B-Vent while allowing for combustion air return. Part slides over B-Vent , tighten integrated hose clamp to secure. Finish with Single Wall or Flex End Pipe. End Pipes are sold separately.
Low Profile Wall Termination
B-Vent Rain Collar seals the top of an existing B-Vent while allowing for combustion air return. Part slides over B-Vent , tighten integrated hose clamp to secure. Finish with Single Wall or Flex End Pipe. End Pipes are sold separately.
End Pipe PPs-Gray
B-Vent Rain Collar seals the top of an existing B-Vent while allowing for combustion air return. Part slides over B-Vent , tighten integrated hose clamp to secure. Finish with Single Wall or Flex End Pipe. End Pipes are sold separately.
Vent Lengths PPs-UV
Made from black U.V. stabilized polypropylene. PPs-UV Vent Lenghths allow for the extension of the vent system.
45° Elbow Long PPS-UV
Made from black U.V. stabilized polypropylene. For exterior offsets or changes in the direction of the vent system.
45° Elbow PPS-UV
Made from black U.V. stabilized polypropylene. For exterior offsets or changes in the direction of the vent system.
87° Elbow Long PPS-UV
Made from black U.V. stabilized polypropylene. For exterior offsets ir changes in the direction of the vent system.
87° Elbow PPS-UV
Made from black U.V. stabilized polypropylene. For exterior offsets or changes in the direction of the vent system.
PPs to PVC Termination Kit
Made from black U.V. stabilized polypropylene. For exterior offsets or changes in the direction of the vent system.
Wall Plate Round (Rubber)
Used to improve aesthetics and reduce drafts at chimney opening or wall penetrations.